Home > Products > Crystal growth furnace
Compact Bridgman Crystal Growth Furnace with Hanging Wire MechanismCompact Bridgman Crystal Growth Furnace with Hanging Wire MechanismCompact Bridgman Crystal Growth Furnace with Hanging Wire Mechanism

Compact Bridgman Crystal Growth Furnace with Hanging Wire Mechanism

    It is a compact and economic 1200℃ Maximum Bridgman crystal growth furnace with 2" quartz tube and precision hanged wire travel mechanism, which is designed for growing small size crystal under control atmosphere or sealed quartz crucible at low cost.

CYKY-1200X-S-VT-BMGH is a compact and economic 1200℃ Maximum Bridgman crystal growth furnace with 2" quartz tube and precision hanged wire travel mechanism, which is designed for growing small size crystal under control atmosphere or sealed quartz crucible at low cost.

Technical parameters of bridgman crystal growth furnace:

Vertical Two Zone Tube Furnace

  • Compact two zones split vertical tube furnace

  • Working Voltage: 110V AC or 220V selectable

  • Max. Power Consumption: 1.5 KW

  • Two Heating Zone: 100 mm L for each Zone, 200 mm L in total 

  • Max. heating temperature: 1200

  • Continuous working temperature: 1100

  • Two programmable digital temperature controllers which control two heating zone independently

  • Max. Temperature gradient: 1/Cm

    • Finding a suitable thermal gradient is user responsibility

    • Adjusting two heating zone's temperature can create different thermal gradient profile

    • Adjusting furnace opening diameter also can change the thermal gradient

  • Quartz tube (2" quartz tube (50mm O.D x 44mm I.D x 600mm L) is included with sealed flange)

Hanging wire

  • One set of Ni-SS hanging wire is included. Max. working temperature is 800.

  • Optional hanging wire for higher working temperature is available upon request:

    • Ni-Cr-Al wire (not included) Max. working temperature < 1100

    • Platinium wire (not included) Max.working temperature > 1200 and < 1600

  • A thin hanging wire goes through the top flange. A positive inert gas can keep processing tube under controlled atmosphere

  • For air-sensitive material, the sample shall be sealed in a small quartz tube with pre-vacuumed

Motor and Controller

  • 6"L x 4"W Touch Screen

  • Wire descending speed is programmable within 3 segments.

  • Precise DC stepper motor controls traveling speed.

  • Pulling speed range: 1-500 um/sec adjustable with the accuracy of +/- 0.05% 

  • Total stoke length controlled by touch screen: 350mm

  • Power: 50W, 110V - 240VC

  • Optional: Lower speed range is available upon request at extra cost. 

Product Dimensions

 520mm (L) x 430mm (W) x 1100mm (H)

Warranty

  • One Year limited warranty with lifetime support

  • Consumable parts such as processing tubes, O-rings, and heating elements are not covered by the warranty

Net Weight

105 kg (230 lbs)


Disclaimer: The product introduction content (including product images, product descriptions, technical parameters, etc.) of this site is for reference only. As the update may not be timely, there will be some differences between the content and the actual situation. Please contact our sales staff to confirm. The information provided on this site does not constitute any offer or promise, and the company will periodically improve and modify the website information, without prior notice, please understand.

Contact Us
  • E-mail: cysi@cysi.wang
  • Tel: +86 371 5519 9322
  • Fax: +86 371 8603 6875
  • Add: No. 820, 8th Floor, 1st Unit, 9th Block, Cuizhu Street, High-Tech Zone, Zhengzhou, Henan, China




Follow Us

Copyright © Zhengzhou CY Scientific Instrument Co., Ltd. All Rights Reserved    Update cookies preferences

| Sitemap |       Technical Support: